Do it yourself
Frequently asked questions about cars and motorcycles

How to add motor oil to the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Engine oil

Today's procedure will show us how to add and top up the new motor oil on the BMW 3 Series. First, we open the car's hood and start unscrewing the motor oil filler cap; we also remove the dipstick and clean the tip with a dry cloth, as shown in the video. At this point, we top up with the right amount, then insert the dipstick to check the motor oil level; then we continue topping up until reaching the maximum level mark, following the video tutorial until the end!

Posted on 3 October 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) The instructions in this guide will show you how to add coolant to the BMW 3 Series in simple and quick steps. First, open the hood of the vehicle an…
BMW Serie 3 (1998-2006 / E46) Check the engine oil level on a BMW 3 Series. Open and lift the hood. Locate the dipstick with the ring to pull it out; remove it and check the oil l…
BMW Serie 3 (1998-2006 / E46) Check the engine oil level on a BMW 3 Series. Open the car door, pull the plastic lever located at the bottom left of the dashboard, and lift the hoo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos