Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter of a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Engine oil

How to change the engine oil and filter of a BMW 3 Series? It's a simple operation by following the video; let's see how to proceed. Lift the car on a column lift, unscrew the oil pan bolt with a wrench (after removing the plastic protective panel), let the fluid drain into a disposal container, and re-tighten the oil pan bolt. After removing the oil from the engine, lower the car to the ground and lift the hood; secure it. Remove the filter located inside the engine compartment and refill the engine with the new oil.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2017 BMW 3 Series
How to Reset the Service Light on a 2017 BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Let's see how to reset the service light on a BMW 3 Series F30/F31: turn on the ignition, and press the BC button on the steering column, which is us…
How to Replace the Oil Filter and O-ring in a BMW 3 Series
How to Replace the Oil Filter and O-ring in a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) This short video illustrates the procedure for replacing the oil filter and O-ring in a BMW 3 Series. The first step is to remove the oil drain plug,…
How to Replace the Camshaft Position Sensor on a BMW 3 Series
How to Replace the Camshaft Position Sensor on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will look at the instructions that will allow you to remove and replace the camshaft position sensor on a gasoline BMW 3 Series. Fi…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos