Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil and Filter on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

How to change oil and filter on BMW 3 Series? Lift your car on a column lift or jack and remove the bolt located under the oil pan using a socket wrench (remove the engine protection panel): this will allow the oil to drain into a container for future disposal.

After letting all the fluid drain completely, reinstall the bolt in the oil pan and move on to the oil filter.

Locate the oil filter cover (engine compartment), unscrew the large black filter cover, remove the old filter, and insert the new one. Ensure the cap is securely seated on the base. Refill the oil reservoir with new fluid following the manufacturer's recommendations.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Filter of a BMW 3 Series
How to Change the Engine Oil and Filter of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How to change the engine oil and filter of a BMW 3 Series? It's a simple operation by following the video; let's see how to proceed. Lift the car on …
How to Change Engine Oil on a BMW 3 Series
How to Change Engine Oil on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you change the engine oil on a BMW 3 Series? It's a simple operation if you follow the right steps. Let's see how to proceed: lift the car on …
How to Replace the Oil Filter and O-ring in a BMW 3 Series
How to Replace the Oil Filter and O-ring in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This short video illustrates the procedure for replacing the oil filter and O-ring in a BMW 3 Series. The first step is to remove the oil drain plug,…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos