Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil on BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

How to change engine oil on BMW 3 Series? It's a simple operation by following the right steps. Let's see how to proceed in this video: Lift the car using a column lift or jack.

After removing the cover panel, use a socket wrench to unscrew the large bolt from the oil pan. Allow the fluid to drain into a disposal container and reattach the oil pan bolt. Lower the vehicle to the ground, raise the hood, and secure it. Remove the oil filter from the engine compartment.

Finally, top off with new oil. Measure the oil level multiple times with the metal dipstick until you reach the ideal measurement.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Add Engine Oil to the BMW 3 Series
How to Add Engine Oil to the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today's procedure will show you how to add and top off the new engine oil in the BMW 3 Series. First, open the hood of the vehicle and start unscrewi…
How to Replace the Dome Light Bulb in the BMW 3 Series?
How to Replace the Dome Light Bulb in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) In this tutorial, you will see how to replace the dome light bulb in the BMW 3 Series, a very simple and quick operation. First, ensure that the key …
How to Replace the Transmission Fluid in a BMW 3 Series?
How to Replace the Transmission Fluid in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the transmission fluid in a BMW 3 Series, loosen the screws that secure the cover panel located at the bottom of the engine compartment. O…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos