Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Control Arm Bushings

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Control arm

The video shows how to replace the bushings of the front control arms. First, lift the car slightly with a ramp to access the underside. The procedure involves removing the damaged part's supports and taking it out, then simply replacing it with the new component you purchased. Finally, reinstall the steel shields, which are essential to prevent damage to mechanical components caused by debris that tends to accumulate over time. This replacement will definitely improve driving comfort and the safety of the vehicle's occupants. The video refers to the BMW 325i E46 model.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Suspension Arm Bushings
Replacing Suspension Arm Bushings
BMW Serie 3 (1998-2006 / E46) If the bushings of the suspension control arm are damaged, you can purchase just the replacement bushings (silent block) instead of the entire arm. T…
Replacing Front Wheel Control Arm Bushings
Replacing Front Wheel Control Arm Bushings
BMW Serie 3 (1998-2006 / E46) The necessary tools are a ratchet wrench, a puller, and the original replacement bushings. Lift the car on a lift to access the underlying mechanics.…
Replacing Suspension Control Arm
Replacing Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) The failure of the rubber part of the bushings on the suspension control arms is a common issue on these models. You can either replace the entire co…

Other guides you may be interested in

How to Replace the Air Filter on a Ford Fiesta

How to replace the engine air filter on a Ford Fiesta? Follow this guide. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Using a screwdriver, undo the soundproofing panel (where the air filter is located), disconnect the engine air intake hose and the metal clip pin. Remove the panel with the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reassemble the air box panel and tighten the screws. Close the front bonnet.

Watch the video!


by ScegliAuto

More videos