Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Wheel Control Arm Bushings

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Control arm

See other generations:
Video tutorial

The necessary tools are a ratchet wrench, a puller, and the original replacement bushings. Lift the car on a lift to access the underlying mechanics.

Remove the wheel to access the faulty component. Remove the underbody shields.

Once you locate the broken control arm, proceed with removal by unscrewing all the bolts. Also remove the steering arm support by unscrewing the two bolts, then use the puller to remove the bushing.

Install the new bushing after cleaning and lubricating the support, then reassemble the control arm and the rest of the previously removed components.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacing Suspension Arm Bushings
Replacing Suspension Arm Bushings
BMW Serie 3 (1998-2006 / E46) If the bushings of the suspension control arm are damaged, you can purchase just the replacement bushings (silent block) instead of the entire arm. T…
Replacing Suspension Control Arm
Replacing Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) The failure of the rubber part of the bushings on the suspension control arms is a common issue on these models. You can either replace the entire co…
Replacing Front Suspension Control Arm
Replacing Front Suspension Control Arm
BMW Serie 3 (1998-2006 / E46) The failure of the bushings (or silent block) of the control arm is a common issue on this car model. To replace it, lift the vehicle on suitable jac…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos