Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator light on the 2019 BMW X4

Model: BMW X4 G02 - Years 2018-2025
Part: Service warning light

In the following guide, we will describe all the various steps you need to follow if you intend to manually reset the service light of your BMW X4 second series (2019). First of all, get in the car and turn on the instrument panel in diagnostic mode by pressing the start button three times consecutively. Once you have done this, press the "BC" button located on the left lever of the steering wheel until you see the mileage on the panel. Finally, hold down the button in the lower left corner and confirm the service light reset by pressing the same button again.

Posted on 29 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service of the BMW X4 F26
How to reset the service of the BMW X4 F26
BMW X4 (2014-2018 / MK 1, F26) In this video we will see how to reset the service light on a BMW X4 F26: we will need to turn on the ignition, without starting the engine. Once ins…
How to Reset the Brake Pad Service Light in a BMW X4?
How to Reset the Brake Pad Service Light in a BMW X4?
BMW X4 (2018-2025 / G02) In this tutorial, we'll see how to reset the brake pad service light in a BMW X4, a very simple and quick operation to perform only after completing …
How to manually reset the TPMS light on the 2021 BMW X4
How to manually reset the TPMS light on the 2021 BMW X4
BMW X4 (2018-2025 / G02) If you own a 2021 BMW X4 and want to learn how to properly reset the tire pressure warning light manually, then all you have to do is carefully read …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos