Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the internal handle in the BMW 3 Series E91?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Handle

See other generations:
Video tutorial

The work we are going to describe is usually carried out because the handle in question shows signs of time and use, such as dullness, peeling paint, etc. Initially, it may seem, looking at this video guide, a somewhat laborious process, but it is not, the important thing is to equip yourself with suitable bodywork levers, as well as generic screwdrivers.

First, we remove the cover with the aforementioned lever, then unscrew the handle, extract the window lift switch, disconnect its cable connector, and the job is done.

The video continues, for those who want, explaining how to proceed with further additional interventions behind the paneling.


Posted on 4 April 2025 by ScegliAuto


Related tutorials

How to Replace the Door Handle on the BMW 3 Series
How to Replace the Door Handle on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) These brief and simple instructions will show you the procedure for removing and replacing the inner door handle of the front door on the BMW 3 Serie…
How to Replace the Interior Handle of a BMW 3 Series?
How to Replace the Interior Handle of a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the interior handle of a BMW 3 Series, remove the trim piece that runs along the panel and loosen all the screws underneath it. Perform th…
How to Remove the Rear Door Panel on a BMW 3 Series
How to Remove the Rear Door Panel on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How to remove the door panel on a BMW 3 Series. Let's look at removing the cover panel. Remove the trim plastic under the inner door handle, unscrew …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos