Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the electronic fan on the BMW 3 Series E36 version

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Checks and maintenance

See other generations:
Video tutorial

In this video we can see how to install the electronic fan instead of the mechanical one on a BMW 3 Series E36 version: first of all, we need to remove the fan guard, which is normally fixed by two bolts (not the case in the video car). The YouTuber found that his fan is no longer working properly, so he decided to replace it with an electronic one. We remove the fan blade, held by four bolts, then with a screwdriver and a 32 key we remove the central mechanism, rotating it clockwise.

We can find the electric fan for example on silux-auto.

It has the code 174408 (200723W3) at the price of 101.99 euros + 6.99 euros for delivery. The assembly is very simple because it fits into the front part, from inside the hood.

We attach the electrical connector and then adjust the temperature sensor.


Posted on 26 June 2025 by ScegliAuto


Related tutorials

How to put the seal between the hood and rear window on a BMW 3 Series E36
How to put the seal between the hood and rear window on a BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In this case we have a BMW 3 Series E36 convertible version, where the problem of the hood coming off from the rear window has occurred. We advise yo…
Replacing Thermostat on BMW 3 Series E36
Replacing Thermostat on BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In this video, see how to change the delicate thermostat on the BMW 3 Series E36. First, remove the air filter and the mass airflow sensor. You will …
How to Replace the Cabin Fan on a BMW 3 Series?
How to Replace the Cabin Fan on a BMW 3 Series?
BMW Serie 3 (1990-2001 / E36) To replace the cabin fan on a BMW 3 Series, open the hood to gain access to the components inside the engine compartment. Just below the windshield, …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos