Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to put the seal between the hood and rear window on a BMW 3 Series E36

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Convertible top

In this case we have a BMW 3 Series E36 convertible version, where the problem of the hood coming off from the rear window has occurred. We advise you to carefully check the compatibility of the replacement part, we recommend the website joom.com/it, code 660b9d403e889a010e00a4d0 at a price of 20.13 euros, with free delivery. Of course, for gluing, silicone will be necessary. We follow the indications of the youtuber, who isolated the glass with bodywork tape and, as he proceeded with the gluing, placed the thinner side on the outside and the longer side on the inside, supported with tape and clips in the folds to provide greater support. Let it dry well, and the result is very good, even aesthetically.

Posted on 16 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Speedometer/Dashboard of BMW 3 Series E36
Removing the Speedometer/Dashboard of BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In today's tutorial video, you will learn how to remove the speedometer/dashboard of a BMW 3 Series E36. First, get inside the car and start by unscr…
Replace the Intake Manifold and Gasket on BMW 3 Series E36
Replace the Intake Manifold and Gasket on BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In this video, see how to remove and replace the intake manifold and its gasket on the BMW 3 Series E36. First, open the hood and start by removing t…
Replacing Thermostat on BMW 3 Series E36
Replacing Thermostat on BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In this video, see how to change the delicate thermostat on the BMW 3 Series E36. First, remove the air filter and the mass airflow sensor. You will …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos