Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the BMW X1

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

Today we will explain how to replace the battery of the BMW X1 model f48. We use a socket wrench to remove the data placed on the battery bracket. We remove the air filter cover and unscrew the four Torx screws using a T20 to remove the grille.

We remove the tray by unscrewing the screws with an 8mm wrench. Using a flathead screwdriver, we remove the battery cover and disconnect the negative terminal connector and immediately after the positive terminal connector.

We remove and insert the new battery. We connect the positive terminal and immediately after the negative terminal, insert the battery cover and proceed to assemble the previously removed elements.


Posted on 30 June 2025 by ScegliAuto


Related tutorials

How to Replace the Battery in a BMW X1?
How to Replace the Battery in a BMW X1?
BMW X1 (2015-2022 / F48) To replace the battery in a BMW X1, open the hood to access the components inside the engine compartment. The battery is located on the right side of…
How to Replace the Battery in a BMW X1?
BMW X1 (2015-2022 / F48) To replace the battery in a BMW X1, open the hood to access the engine compartment, as the battery is located just below the windshield. There will b…
How to Replace the BMW X1 Remote Battery?
How to Replace the BMW X1 Remote Battery?
BMW X1 (2015-2022 / F48) To replace the battery in the BMW X1 remote, slide out the key along with the cover located on the top of the remote: you will need to press the side…

Other guides you may be interested in

    Frequently Asked Questions

    • X1 2015-2022 - Where is the emergency call battery located in the BMW X1? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos