Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the error code light of the brake pads on the BMW 1 Series

Model: BMW Serie 1 MK 3, F40 - Years 2019-2026
Part: Warning light – error code

Today we will explain how to reset the brake pad warning light on a 2020 BMW 1 Series car. Press the start/stop button three times and immediately after, press and hold the BC button for about 10 seconds. Release the button and press the reset button for another two or three seconds. After completing the reset, restart the instrument panel. It is important that during the entire procedure, the parking brake is deactivated, otherwise the reset will not be performed. If, despite deactivating the parking brake, the car still shows the error code warning light on the instrument panel, it is necessary to go to a workshop for a computerized diagnosis.

Posted on 22 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the 2024 BMW 1 Series
How to reset the service light on the 2024 BMW 1 Series
BMW Serie 1 (2024-2026 / F70) Today we will explain how to reset the service light and error code for the brake pads of the BMW 1 Series model F 70 from 2024. To eliminate the mes…
How to Reset the Brake Pad Warning Light on a BMW 1 Series E87
How to Reset the Brake Pad Warning Light on a BMW 1 Series E87
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide shows how to reset the brake pad replacement warning light on a BMW 1 Series E87. Perform this reset only after successfully replacing the…
Error codes CC-ID on BMW Series 1-3-5 and X5
Error codes CC-ID on BMW Series 1-3-5 and X5
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) The term CC-ID on a BMW vehicle refers to the check control identification code, which monitors the various functions of the car, and when a malfunct…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 1 2011-2019 - What does the BMW 1 Series airbag warning light mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos