Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disconnect the Power Steering Hoses on BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006

In this brief guide, you will find the main instructions to disconnect the power steering hoses on the BMW 3 Series. First, open the hood of the vehicle and locate the hydraulic power steering hoses next to the alternator; then press on the hose clips to remove them, allowing the power steering fluid to drain into a container, as shown in the video. At this point, remove and replace the hoses with new ones in case of a leak; once the connections are made, refill the hydraulic power steering fluid.

Posted on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) The fuses in the BMW 3 Series are located inside the designated fuse boxes within the vehicle. For the BMW 3 Series, open the trunk and lift the carp…
How to Replace the Shift Knob on a BMW 3 Series
How to Replace the Shift Knob on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you can start, sit in the driver's seat of your BMW 3 Series. Begin by grasping the shift knob with both hands. At this point, pull firmly tow…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos