Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the power steering fluid reservoir located in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the power steering fluid reservoir is located in the BMW 3 Series and how to proceed if you need to replace it. As shown, it is located inside the engine compartment, right behind the left headlight. To remove it, first drain the fluid inside using a pump or a syringe, then loosen the mounting bolts and disconnect the two lower hoses.

Once done, completely drain the system by removing the indicated bolt, install the replacement reservoir, and add the required amount of fluid through the reservoir itself.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Maintain the Steering on a BMW 3 Series
How to Maintain the Steering on a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) In this video, see how to maintain the steering on a BMW 3 Series. Is the steering hard to turn? Replace the power steering fluid to solve the proble…
How to replace the windshield washer fluid reservoir of the BMW 3 Series.
How to replace the windshield washer fluid reservoir of the BMW 3 Series.
BMW Serie 3 (1998-2006 / E46) Today we will see the information that will allow us to disassemble the windshield washer fluid reservoir of the BMW 3 Series, in simple steps. First…
How to Replace the Brake Fluid in a BMW 3 Series?
How to Replace the Brake Fluid in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the brake fluid in a BMW 3 Series, first drain the old fluid from the reservoir. Open the hood and remove the cover located just below the…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos