Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the BMW 3 Series power steering pump

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Pump
Operation: How to replace the BMW 3 Series power steering pump

Let's see today in this short guide the main steps that will allow us to disassemble and replace the BMW 3 Series power steering pump. First we open the bonnet of our car and start removing the plastic cover that we find above the bumper; then we remove the air filter box and the power steering fluid pan, as shown in the video. At this point we are going to disconnect the V-belt, then unscrewing the screws of the power steering pump; let's replace it with the new one, with the original spare part, applying the reverse procedure!


Posted on 11 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 1990-2001 - What is the cost of the water pump on the 1992 BMW 320i? Read Answer
    • Serie 3 1990-2001 - How much does the water pump cost on the 1992 BMW 320i? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos