Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Power Steering Pump Disassembly Instructions

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Pump

See other generations:
Video tutorial

The power steering pump is located at the lower right front of the engine compartment. To access it, position the vehicle on appropriate jack stands and remove the right front wheel and the corresponding wheel well.

At this point, remove the auxiliary belt by loosening the tensioner and take off the power steering pump pulley to access the mounting bolts at the front. Additional bolts are located at the rear, and to complete the disassembly, disconnect the hose from the steering box. During this maneuver, be careful to collect the hydraulic oil.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Power Steering Pump Replacement
Power Steering Pump Replacement
BMW Serie 3 (1998-2006 / E46) If you often need to top off the power steering fluid reservoir, it means there is a leak in the hydraulic system (pump, hoses, steering gear). The p…
How to Replace the Power Steering Pump on a BMW 3 Series
How to Replace the Power Steering Pump on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, let's go through the main steps to remove and replace the power steering pump on a BMW 3 Series. First, open the hood of your vehicle and star…
How to Disconnect the Power Steering Hoses on BMW 3 Series
How to Disconnect the Power Steering Hoses on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this brief guide, you will find the main instructions to disconnect the power steering hoses on the BMW 3 Series. First, open the hood of the vehi…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos