Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement for BMW i8 [Electric]

Model: BMW i8 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

Video tutorial

The 131 bhp synchronous electric motor is paired with a 1,500 cm³ TwinPower Turbo three-cylinder engine with direct injection, producing 231 bhp, for a total of 362 bhp. It is clear that the combustion engine requires maintenance, and at the very least, you can perform the engine oil and filter replacement yourself.

The engine is located at the rear of the vehicle, and to access the oil sump, it is advisable to lift the car using a jack on the designated rib. The oil drain plug is located at the centre of the sump, and just above it is the oil filter housing, which is of the cartridge type, including the sealing ring for the plug.

Access the engine bay to fill the engine with clean oil.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Electric Supercar: BMW i8 [Electric]
Electric Supercar: BMW i8 [Electric]
BMW i8 (2014-2021 / MK 1) BMW i8: a symbol of luxury and speed at the same time. This vehicle has been designed primarily for maximum performance with CO2 emissions comparable…
How do you replace the air filter of the BMW i8?
How do you replace the air filter of the BMW i8?
BMW i8 (2014-2021 / MK 1) In order to replace the air filter of the BMW i8, you will need to open the rear hatch, as in this car the combustion engine is mounted in the centra…
BMW i8 2018
BMW i8 2018
BMW i8 (2014-2021 / MK 1) This video presents a hybrid supercar from BMW: the i8. Despite its performance, this vehicle can travel 23 miles in electric mode alone and up to 31…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos