Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a BMW 3 Series G20/G21

Model: BMW Serie 3 G20 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on a BMW 3 Series G20/G21 requires access to the diagnostic menu. Turn on the ignition without starting the engine, and press the start button three times in a row, then hold the "BC" button (on the outer edge of the wiper lever), or the "0.0" button on the dashboard - depending on the trim - until the display shows "Diagnose mode active". In the menu, select "engine oil" and hold BC to reset the oil. The display will show the new interval.

For the brakes ("Bremsbeläge" = pads), the reset is only possible after replacing the pads and wear sensors. If the sensors are still old, the system prevents the reset.

After replacement, repeat the procedure to reset the brakes as well. Exit the menu by turning off the ignition.

The procedure is simple, but it requires that the components be actually changed before the reset.


Posted on 19 July 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2019-2026 / G20) Certain jobs, such as the one mentioned above, are increasingly being carried out not so much to repair damage or completely replace that part of the…
BMW Serie 3 (2019-2026 / G20) If you want to carry out the manual reset procedure of the service indicator light of your BMW 3 Series G20 (2019), then all you have to do is read t…
BMW Serie 3 (2019-2026 / G20) In this guide for all BMW 3 Series G20 owners, you will learn how to access the fuse box that contains all the various fuses of the vehicle. First, o…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - What do the red and yellow oil warning lights mean in the BMW 3 series? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos