Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement Using a Pump

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine oil

See other generations:
Video tutorial

A quick and practical method to replace engine oil involves using an electric pump. The first step is to remove the oil cap. Using the appropriate equipment, carefully suction the engine oil by inserting the suction tube into the dipstick tube, then pump to create a vacuum and draw out the oil. Remove the used cartridge from the filter housing and replace it with a new one, also changing the O-ring gasket.

Refill with new oil, reinstall the dipstick, and check the correct level on the graduated scale. Do not dispose of used oil in the environment; take it to designated collection centers.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Engine Oil Change with Vacuum Pump
Engine Oil Change with Vacuum Pump
BMW Serie 3 (1998-2006 / E46) Protect the engine compartment from oil splashes with a rag. The first step is to remove the oil filter using an adapter and a ratchet wrench with a …
Cabin Air Filter Replacement
Cabin Air Filter Replacement
BMW Serie 3 (1998-2006 / E46) The cabin air filter is located in the engine compartment, centrally positioned just below the windshield. Once you locate the filter housing, remove…
Replacing the Oil Filter and Engine Oil
Replacing the Oil Filter and Engine Oil
BMW Serie 3 (1998-2006 / E46) Lift the vehicle with appropriate jacks and secure it with suitable supports to prevent it from falling. The necessary tools are a ratchet wrench, a …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos