Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change with Vacuum Pump

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine oil

See other generations:
Video tutorial

Protect the engine compartment from oil splashes with a rag. The first step is to remove the oil filter using an adapter and a ratchet wrench with a swivel and extension. Extract the used cartridge from the filter housing and replace it with a new one, also changing the O-ring gasket.

Using the appropriate equipment, carefully vacuum out the engine oil by inserting the suction tube into the dipstick tube. Top off with new oil, reassemble the dipstick, and check the correct level on the graduated scale.

Do not dispose of used oil in the environment; take it to designated collection centers.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2017 BMW 3 Series
How to Reset the Service Light on a 2017 BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Let's see how to reset the service light on a BMW 3 Series F30/F31: turn on the ignition, and press the BC button on the steering column, which is us…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
BMW Serie 3 (2005-2013 / E92, E90, E91) Replace the engine oil and its filter, which is one of the simplest DIY maintenance tasks. It is important to dispose of used oil properly. Start by …
Engine Oil Replacement on BMW 320
Engine Oil Replacement on BMW 320
BMW Serie 3 (2012-2019 / F31, F30) Let's see how to replace the oil and filter on a BMW 320? Lift the vehicle with a jack. Remove the protective panel under the chassis, then use a soc…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos