Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

Replace the engine oil and its filter, which is one of the simplest DIY maintenance tasks. It is important to dispose of used oil properly.

Start by replacing the oil filter cartridge, located at the front of the engine near the intake manifold: unscrew the cap and remove the old cartridge. Before installing the new one, replace all the O-rings included in the new filter kit. Next, access the oil pan and unscrew the drain plug to drain the used oil. Finally, fill the engine with new oil until reaching the maximum level.

Choosing a quality oil is essential for these engines with a chain-driven timing system immersed in oil.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacing the Oil Filter and Engine Oil
Replacing the Oil Filter and Engine Oil
BMW Serie 3 (1998-2006 / E46) Lift the vehicle with appropriate jacks and secure it with suitable supports to prevent it from falling. The necessary tools are a ratchet wrench, a …
Changing Engine Oil and Filter
Changing Engine Oil and Filter
BMW Serie 3 (1998-2006 / E46) Obtain the correct amount of oil suitable for your engine type. Lift the vehicle with appropriate jacks and secure it with suitable supports to preve…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
BMW Serie 3 (1998-2006 / E46) Obtain the correct amount of oil suitable for your engine type. Lift the vehicle with appropriate jacks and secure it with suitable supports to preve…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos