Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located in the engine compartment, centrally positioned just below the windshield. Once you locate the filter housing, remove the plastic clips securing the cover (two on the sides and one in the center), lift it, and pull out the old filter.

Remove any dirt residue from the filter housing, possibly using a vacuum cleaner, and install the new filter (preferably activated charcoal) following the airflow direction indicated by arrows on the filter itself. During the filter replacement, sanitize the cabin with a germicidal spray.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a BMW 3 Series
How to Replace the Cabin Air Filter in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you start, sit in the driver's seat of your BMW 3 Series. First, unscrew and remove the screws that secure the cabin air filter cover. Then, d…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
BMW Serie 3 (2005-2013 / E92, E90, E91) The cabin air filter is located in the engine compartment, just below the windshield: once you open the hood, remove the screws that secure the cover…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
BMW Serie 3 (1998-2006 / E46) Obtain a cabin air filter of the same model as the original. The cabin air filter purifies the air inside the vehicle and is located in the engine co…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos