Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located in the engine compartment, just below the windshield: once you open the hood, remove the screws that secure the cover of the cabin air filter container, take it out of its seat, and turn it upside down to extract the old filter; clean the container of any dirt residue and install the new filter, ensuring the correct airflow direction, then reattach it to the vehicle; due to the low cost and the importance of filtering the air entering the cabin, it is not recommended to wash the filter but to always replace it with a new one, preferably one with activated charcoal.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
BMW Serie 3 (1998-2006 / E46) The cabin air filter is located in the engine compartment, just below the windshield, in a central position: first, remove the gasket, unscrew the sc…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
BMW Serie 3 (1998-2006 / E46) The cabin air filter is located in the engine compartment, centrally positioned just below the windshield. Once you locate the filter housing, remove…
How to Replace the Cabin Air Filter in a BMW 3 Series
How to Replace the Cabin Air Filter in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you start, sit in the driver's seat of your BMW 3 Series. First, unscrew and remove the screws that secure the cabin air filter cover. Then, d…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos