Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the thermostat of a BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Thermostat
Operation: How to remove the thermostat of a BMW 3 Series

Let's see in the following video how to remove the thermostat and the water pump on a BMW 3 Series. We lift the car on a column bridge; we remove the engine cover panel. Unscrew the pins of the thermostat sleeve as in the video and (we use a socket wrench with relative bushes) remove the sealing cap of the housing and extract the coolant thermostat and immediately after the water pump. We insert the new piece and close with the cap of the sleeve. We tighten the pins well and we're done. Make sure you have correctly inserted and assembled all the previously disassembled pieces.


Posted on 22 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the thermostat of the BMW E90 2005? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos