Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Door trim panel

Let's see how to remove the door panel of a BMW 3 Series. Disconnect the battery terminals located in the engine compartment. Using a screwdriver, remove the screws located in the handle area (after removing the plastic screw cover). Remove the trim that covers the panel; unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and disengage it from the door (disconnect the power wiring and the opening cable). Perform the desired maintenance inside the door.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Speaker of a BMW 3 Series
How to Remove the Door Speaker of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Want to remove the inner speaker from the door of a BMW 3 Series? In this detailed video, you'll see how to quickly take it out from the door housing…
How to disassemble the front door airbag of the BMW 3 Series
How to disassemble the front door airbag of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) These short and simple steps will allow us to disassemble and replace the airbag of the front door of the BMW 3 Series. First, we open the front door…
How to Remove the Door Panel of a BMW 3 Series?
How to Remove the Door Panel of a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, open the door of your BMW 3 Series. Start by prying and removing the inserts from the door panel using a thin but sturdy tool. Once…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos