Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Front Headlight Components

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Headlight

Open the hood and ensure it is securely supported. Locate the hole on the front edge of the inner fender: insert a medium-sized screwdriver, press the tab of the turn signal, and pull it forward to disconnect the connector from the bulb holder. Next, remove the gasket on the top of the headlight and the plastic trim on the bottom. At this point, release the retaining clips of the headlight lens by bending them upward, remove the lens, and then the black plastic reflector.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Rear Headlight
Instructions for Removing the Rear Headlight
BMW Serie 3 (2005-2013 / E92, E90, E91) Removing the rear headlight is very simple and does not require special precautions; open the trunk to access the cargo area and remove the inner tri…
Instructions for Removing the Front Headlight
Instructions for Removing the Front Headlight
BMW Serie 3 (1998-2006 / E46) To remove the front headlight, first remove the trim along the lower edge between the headlight and the bumper: it is secured with pressure clips, so…
Instructions for Removing Front Headlight
Instructions for Removing Front Headlight
BMW Serie 3 (1998-2006 / E46) Remove the mounting bolts of the headlight from the radiator support and the one located at the bottom of the upper inner edge (toward the grille) th…

How to Remove the Stereo from a Hyundai i20

Want to remove the stereo from your Hyundai but don’t know how? In this video, see how to remove the original stereo from your car. First, remove the dashboard cover plastics using a plastic tool, then detach the central frame of the stereo (where the air vents are located) along with the related clips of the control buttons. Once the stereo is free from constraints, unscrew the fastening screws on its sides. Pull the stereo out by hand and disconnect the cables (power and antenna). To reassemble, proceed in reverse.

Watch the video!


by ScegliAuto

More videos