Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing headlights on a BMW 528i

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Headlight

Removing the headlights on this car is a long but not difficult process. Let's start by opening the hood, removing the gaskets under which are the screws that secure the plastic post that covers the entire frame and housing of the headlight. Once this is done, we will be able to remove the under-wheel to gain access from the inside. Now we have access to all the screws that lock the headlight in place and after having removed them we can proceed to remove the headlight itself, but not before having disconnected the headlight cable connectors and having removed the bumper from its anchorage with the side part of the car body.

Posted on 25 June 2020 by ScegliAuto

Video tutorial

Related tutorials

Fuel pump replacement BMW 5 Series 528i Petrol
Fuel pump replacement BMW 5 Series 528i Petrol
BMW Serie 5 (1995-2003 / E39) In today's video tutorial we will see how to remove and replace the fuel pump of a BMW 5 Series 528i Petrol. First of all, we access the back and rem…
How to Replace the Headlight Bulbs on a BMW 5 Series
How to Replace the Headlight Bulbs on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Let's replace the headlight bulbs on a BMW 5 Series. Start by removing the plastic cover located at the bottom of the bumper using a suitable screwdr…
How to Reset the "ECU" (Engine Control Unit) to Factory Settings
How to Reset the "ECU" (Engine Control Unit) to Factory Settings
BMW Serie 5 (1995-2003 / E39) The following video tutorial explains how to reset the "ECU" (Engine Control Unit) to factory settings on a BMW 5 Series (the same procedure applies …

Other guides you may be interested in

How to Remove the Rear Bumper of an Opel Corsa

How to remove the rear bumper of an Opel Corsa? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwdriver or battery-powered drill to unscrew the securing screws located near the rear lights, then remove them from the body along with their connectors. Unscrew the screws located at the top of the bumper, then unscrew the screws on the sides of the wheel arch liners and at the bottom of the bumper. Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the body (disconnect any power cables if necessary).

Watch the video!


by ScegliAuto

More videos