Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlight Bulb for BMW 1 Series

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Headlight bulb

Today, in this video tutorial, you will learn how to remove and replace the bulbs of the front headlight of a second-generation BMW 1 Series. First, turn the wheels fully to access the cover found in the wheel arch: remove this cover to access the bulb compartment. Now, remove the protective cap of the bulbs and disconnect the electrical connector to remove the bulb. At this point, install the new bulb, reconnect the connector, and secure it; then, reattach the cap and put back the plastic cover of the wheel arch.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Headlight Bulb on a BMW 1 Series
How to Change the Front Headlight Bulb on a BMW 1 Series
BMW Serie 1 (2019-2026 / MK 3, F40) To change the front headlight bulb on a BMW 1 Series, switch off the vehicle and the lights, then open the bonnet. Locate the rear of the affected he…
How to replace the headlight bulb on the BMW 1 Series?
How to replace the headlight bulb on the BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To replace the headlight bulb on the BMW 1 Series, remove the inner cover of the wheel arch corresponding to the headlight containing the bulb to be …
Replacing the front headlight bulb on a BMW 1 Series
Replacing the front headlight bulb on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This guide shows how to remove and replace the front headlight bulb on a first series BMW 1 Series, following these simple steps. First, open and lif…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos