Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Air Filter on BMW 3

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

How do you replace the cabin air filter on a BMW 3? Let's see how to remove the cabin air filter from under the dashboard (located under the glove compartment). Remove the screws located under the cover plastic (under the glove compartment), then take off the cover.

Remove the screws under the cover plastic, then uncover the air filter cover plastic (as shown in the video). Pull the air filter out of its housing as shown in the video.

Insert the new filter into its housing and close it with the cover plastic. Reinstall and secure the cover plastic under the dashboard.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on BMW 3 Series
Replacing Cabin Air Filter on BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Replace the cabin air filter on the BMW 3 Series if worn. Use a plastic trim tool to detach the cover located at the bottom of the glove compartment.…
How to Replace the Cabin Air Filter in a BMW 3 Series
How to Replace the Cabin Air Filter in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you start, sit in the driver's seat of your BMW 3 Series. First, unscrew and remove the screws that secure the cabin air filter cover. Then, d…
How to Replace the Cabin Air Filter on a BMW 3 Series
How to Replace the Cabin Air Filter on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How do you replace the cabin air filter on a BMW 3 Series? Let's see how to remove the filter located in its designated housing: Open and lift the ho…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos