Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 1
    4. : Removing the BMW 1 Series headlight bulb

BMW Serie 1 - Video tutorial

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Headlight bulb
Operation: Removing the BMW 1 Series headlight bulb

We see the disassembly of the damaged bulb, located inside the front headlight of BMW 1. We lift the front hood of the car, we secure the same. We disassemble the plastic cover from behind the rear light to access the bulbs. We remove the damaged bulbs from the lamp holder and replace them with new ones (size and voltage are the same). After having finished the various connections we can close the back of the lighthouse again with the dedicated cap. We just have to turn on the instrument panel and test the operation of the bulbs of all the car's headlights.


Posted on 2 January 2024 by ScegliAuto



Replacement of the front headlight bulb of the BMW Series 1.
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today we will see the procedure that will show us how to disassemble and replace the headlight bulb of the BMW 1 Series. First, we lift the hood of o
How to replace the headlight bulb on the BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In order to replace the headlight bulb of the BMW 1 Series, you have to remove the inner cover of the wheel arch corresponding to the headlight that
Replacement of the front headlight bulb of the BMW 1 Series.
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today's guide will show us the steps that will allow us to disassemble and replace the low beam bulb of the front headlight of the BMW 1 Series. Firs

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos