Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E90, E92, E91
- Years 2005-2013 Resetting the tire warning light on BMW 3 Series E90 (and similar) is very simple. Get in the car, insert the ignition key and click on start without pressing any pedal. Wait a few seconds for the service warning light to disappear from the instrument panel and press the arrow up (on the left rod of the steering wheel) until the "reset" item appears, then press once the button at the end of the rod, release it and press it again but this time keeping it pressed for a few seconds. VoilÃ! Reset happened! Before following the procedure, check each tire and their pressure carefully.
Posted on 11 January 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |