Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Central Display on BMW 5 Series E90-E91-E92

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Onboard computer

In this video tutorial, you will see the instructions for disassembling the central display of the onboard computer on a BMW 5 Series E91, as well as on E90 and E92. First, get inside the vehicle and use a Torx wrench to unscrew the screws found in the plastic cover of the display, as shown in the video; then gently pull out the display, disconnecting the various electrical connectors at the back by lifting the levers. At this point, if necessary, you can replace it with the new one and reassemble everything by applying the reverse procedure!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on the BMW 5 Series
How to Adjust the Handbrake on the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) To adjust and align the handbrake on the BMW F36, only a few steps are needed. As we can see in the video, this procedure is the same for the 5 Serie…
Removing the Steering Angle Sensor from BMW 3 Series E90
Removing the Steering Angle Sensor from BMW 3 Series E90
BMW Serie 5 (2003-2010 / E61, E60) In today's video tutorial, we will see how to remove the steering angle sensor from a BMW 3 Series E90. First, get inside the car and remove the stee…
How to Reset and Calibrate Window Regulator System on BMW 5 Series E60 - 3 Series E90
How to Reset and Calibrate Window Regulator System on BMW 5 Series E60 - 3 Series E90
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, learn how to reset and recalibrate the window regulator system on a BMW 5 Series E60, 3 Series E90, and also on E87, E84, F10…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos