Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Grilles

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Grille

In this video, you can see the procedure to replace the front grilles of a BMW 3 Series. The two grilles are different and, as such, have two different product codes. Both are secured with clips: three at the bottom, one on each side, and one at the top. First, open the hood; then, pull the old grille outward from the inside. Once removed, simply place the new grille in the slot where the old one was and apply some pressure to engage all six securing clips. Repeat the same steps for the second grille, remembering to remove any silicone residue left from the attachment of the replaced grille.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Grilles on BMW 3 Series
Replacing Front Grilles on BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Want to remove the front grilles from your BMW 3 Series? Let's see how to take them off from above the front bumper. Lift the hood after unlocking it…
Replacement of the front bumper grilles of the BMW 3 Series
Replacement of the front bumper grilles of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will see the main steps that will allow us to disassemble and replace the front bumper grille of the BMW 3 Series. First, we open t…
How to Replace the Front Grilles on a BMW 3 Series?
How to Replace the Front Grilles on a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) To replace the front grilles on a BMW 3 Series, simply detach the retaining clips that hold these components in their housing: they are not secured b…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos