Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Old Grilles

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Grille

The video shows a simple guide on how to remove the old grilles from a BMW 3 Series and how to install the new ones. After opening the hood, push the grille from the back with one hand and detach the clips that hold it to the body. Once both grilles are removed, it’s best to clean the edges of the body where the new grilles will be placed with a cloth. Now you can insert the new grilles. Position the first grille correctly in its slot, gently pressing it in, then apply some pressure with your hands to secure it to the body. You will hear a double "clack" when the clips engage. Repeat the same process for the second grille. This procedure will take no more than five minutes!

Updated on 4 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the front bumper grilles of the BMW 3 Series
Replacement of the front bumper grilles of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will see the main steps that will allow us to disassemble and replace the front bumper grille of the BMW 3 Series. First, we open t…
How to Replace the Front Bumper Grilles on the BMW 3 Series
How to Replace the Front Bumper Grilles on the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) The instructions in this guide will allow you to remove and replace the front bumper grilles on the BMW 3 Series. First, move to the front of the veh…
Replacing Front Grilles on BMW 3 Series
Replacing Front Grilles on BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Want to remove the front grilles from your BMW 3 Series? Let's see how to take them off from above the front bumper. Lift the hood after unlocking it…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos