Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Grilles on BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Grille

Want to remove the front grilles from your BMW 3 Series? Let's see how to take them off from above the front bumper. Lift the hood after unlocking it and check if you can release the grilles from inside. Disconnect the retaining clips located on the sides of the plastic grille. Remove the grille after unlocking all the clips. To proceed with the installation: secure the grille onto the bumper and tighten all the clips around its perimeter. Remove the second grille in the same way as the first. Close the hood after installing the parts.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Rear Bumper on BMW 3 Series
Replace the Rear Bumper on BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Is the rear bumper on your BMW 3 Series damaged and needs replacement? Here’s how to change it. Use a screwdriver to remove the fastening pins locate…
BMW E90 E91 E92 E93: Replace Front Window Regulator
BMW E90 E91 E92 E93: Replace Front Window Regulator
BMW Serie 3 (2005-2013 / E91, E90, E92) Replacing the front window regulator for BMW E90, E91, E92, and E93 models follows a similar procedure for all these versions of the Anglo-German aut…
How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner in a BMW 3 Series, a very simple and quick operation. First, open the trunk. Then, remove …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos