Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing BMW 1 Headlight Bulb

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Headlight bulb

Replace the front headlight bulbs if they are damaged. Here’s how to remove the front headlight bulbs of the BMW 1 Series. Lift the bonnet by pulling the lever inside the vehicle. Locate the inspection cap at the back of the headlight. Remove the cover cap from behind the headlight to access the bulbs. Pull the bulb holder out of the headlight and extract the damaged bulb using a screwdriver. Install the new bulb (ensure it is the correct type and size) and insert the bulb holder back into the headlight housing. Close the headlight with the inspection cap. Replace all damaged headlight bulbs.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb on the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today, you will learn how to remove and replace the front headlamp bulb on the BMW 1 Series. First, lift the bonnet of your car and start by removing…
How to replace the headlight bulb on the BMW 1 Series?
How to replace the headlight bulb on the BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To replace the headlight bulb on the BMW 1 Series, remove the inner cover of the wheel arch corresponding to the headlight containing the bulb to be …
How to Replace the Rear Light Bulb on the BMW 1 Series?
How to Replace the Rear Light Bulb on the BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To replace the rear light bulb on the BMW 1 Series, lift the boot lid and remove the plastic cover next to the light. Underneath, there will be a bol…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos