Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I replace the instrument cluster on the BMW 3 Series E36?

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Instrument cluster

In order to replace the instrument panel of the BMW 3 Series E36 you have to loosen the two 20-inch torx screws that are located immediately above the speedometer, on the right and left side. Their removal will allow the instrument panel to be disengaged by pulling it outwards. Once extracted, it will be possible to remove it completely after having removed the relative connectors at the back. Once the old instrument cluster has been removed, the new part can be connected to the connectors and inserted into its housing. Finally, it will have to be fixed with the same screws removed previously.

Posted on 4 October 2021 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the speedometer / instrument panel BMW Serie 3 E36
Disassembly of the speedometer / instrument panel BMW Serie 3 E36
BMW Serie 3 (1990-2001 / E36) In today's video tutorial we will see how to remove the speedometer / instrument cluster of a BMW 3 Series E36. First we get inside the car and start…
Replace the intake manifold and gasket of the Bmw 3 Series E36
Replace the intake manifold and gasket of the Bmw 3 Series E36
BMW Serie 3 (1990-2001 / E36) Let's see in this video how to remove and replace the intake manifold and its gasket on the Bmw 3 Series E36. First we open the engine hood and start…
How to disassemble the front door lock cylinder of the BMW 3 Series E36.
How to disassemble the front door lock cylinder of the BMW 3 Series E36.
BMW Serie 3 (1990-2001 / E36) Let's see in this video how to disassemble and replace the lock cylinder of the front door of the BMW 3 Series E36, following the instructions below.…

How to Remove the Instrument Cluster on a Nissan Qashqai

How to remove the instrument cluster on a Nissan Qashqai? Follow these steps: use a lever to remove the trim plastics under the steering wheel and take out the air vent next to the instrument cluster. Unscrew the securing screws of the instrument cluster with a screwdriver; after removing the plastics, pull out the ignition button (right side) from the dashboard and detach the plastics in the centre of the cluster. Unscrew the securing screws around the instrument cluster and remove it along with the power cable located at the back of the cluster. Install a new part or replace the LEDs/bulbs in the cluster and reassemble it.

Watch the video!


by ScegliAuto

More videos