Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Hood of a BMW X4?

Model: BMW X4 MK 1, F26 - Years: 2014, 2015, 2016, 2017, 2018
Part: Body

See other generations:
Video tutorial

Let's discover in this short and simple guide how to open the hood on the first generation BMW X4, as well as on the X3 and X4. First, open the front door and pull the lever to unlock the hood latch; then locate the mechanism to release on the right side of the hood, near the grille of the bumper, as shown in the video.

At this point, use your fingers to release the mechanism (the hood lever) to open and lift the hood; then push the hood down to close it securely!


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to reset the service of the BMW X4 F26
How to reset the service of the BMW X4 F26
BMW X4 (2014-2018 / MK 1, F26) In this video we will see how to reset the service light on a BMW X4 F26: we will need to turn on the ignition, without starting the engine. Once ins…
How do you replace the SOS system battery in the BMW X4?
How do you replace the SOS system battery in the BMW X4?
BMW X4 (2014-2018 / MK 1, F26) The BMW SOS device, specifically referring to the BMW X4, activates when an emergency situation is detected, such as a vehicle collision. Automatical…
Disassembly of the storage compartment drawer of the BMW X4
Disassembly of the storage compartment drawer of the BMW X4
BMW X4 (2014-2018 / MK 1, F26) Today's instructions will allow us to disassemble and replace the glove box of the BMW X4, in simple and quick steps. First, we get into the car and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos