Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Anti-Trap Function on the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Warning light – error code

To reset the Anti-Trap function of the windows on the BMW 3 Series, turn on the ignition and fully lower the driver's side window while holding the button down. Keep the button pressed until the Anti-Trap indicator appears on the display, depicted as a door with the window down and an exclamation point. At this point, raise the window and hold the button for a few more seconds; this will deactivate the Anti-Trap function of the BMW 3 Series windows.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reinitialize the Windows on a BMW 3 Series E36
How to Reinitialize the Windows on a BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) When you disconnect the battery for any reason on your BMW 3 Series E46, you need to reinitialize the one-touch anti-pinch feature (the feature that …
How to Replace the Glow Plugs on a BMW 3 Series
How to Replace the Glow Plugs on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before starting, open the hood of your BMW 3 Series. Begin by removing the upper engine covers, loosening the mounting screws, and then take off the …
How to Reset the Adaptive Headlight Indicator on a BMW 3 Series
How to Reset the Adaptive Headlight Indicator on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Follow these steps to reset the adaptive headlight indicator on a BMW 3 Series. This operation is very simple. Enter the vehicle, turn on the ignitio…

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos