Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Angle Eyes Position Light Bulbs on a BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

Replacing the angle eyes position light bulbs on a BMW 3 Series E90 is very simple. Follow these steps in this tutorial. First, lift the car with a jack and remove the wheel on the side you will be working on. Once done, remove the front part of the wheel well by unscrewing the 8 bolts with an 8mm wrench and the single 10mm bolt. At this point, you can remove the rear cap of the bulb, disconnect the connector, pull it out, and insert the replacement. Reassembling everything will be just as simple; just follow the same procedure in reverse.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Angel Eyes in a BMW?
BMW Serie 3 (1998-2006 / E46) The so-called angel eyes are uniquely shaped position bulbs commonly used in BMW cars. There are two ways to install these lights: accessing from und…
How to Install Angel Eyes Bulbs on the BMW 3 Series?
How to Install Angel Eyes Bulbs on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To install the angel eyes bulbs on the BMW 3 Series, open the hood and remove the bolt located on the top of the headlight that contains the turn sig…
How to replace the position light bulbs in the BMW 3 Series?
How to replace the position light bulbs in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you can see how to replace the position light bulbs in the BMW 3 Series, lights also known as "angel eyes". Before proceeding, ensu…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos