Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the position light bulbs in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you can see how to replace the position light bulbs in the BMW 3 Series, lights also known as "angel eyes". Before proceeding, ensure the key is not in the ignition for safety. Start by lifting the side you will be working on, then remove the wheel and subsequently the front area of the fender.

Once done, remove the headlight cover using a flathead screwdriver, disconnect the power connector, and remove the two screws with a Torx T15 wrench. At this point, you can separate the bulb from the socket and follow the reverse procedure to install the replacement.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Replace the Angle Eyes Position Light Bulbs on a BMW 3 Series?
How to Replace the Angle Eyes Position Light Bulbs on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) Replacing the angle eyes position light bulbs on a BMW 3 Series E90 is very simple. Follow these steps in this tutorial. First, lift the car with a j…
How to Replace the Position Light Bulbs in a BMW 3 Series?
How to Replace the Position Light Bulbs in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) Replacing the position light bulbs in a BMW 3 Series E90 is a very simple task. As shown, the optical group is accessible from the small door located…
How to Replace the Parking Lights in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, you will see how to replace the bulbs for the parking lights in a BMW 3 Series, a very simple task. First, ensure that the key is n…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos