Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Parking Lights in a BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
This video is currently unavailable

In this tutorial, you will see how to replace the bulbs for the parking lights in a BMW 3 Series, a very simple task. First, ensure that the key is not in the ignition.

Next, lift the side you will be working on with a jack and remove the wheel. Then, remove all the mounting bolts for the front fender panel using a 8mm wrench.

Locate the headlight in question and remove the rear cover. At this point, you can unscrew the retaining screws for the bulb with a T15 Torx wrench, pull it out, and install the replacement.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Replace the Position Light Bulbs in a BMW 3 Series?
How to Replace the Position Light Bulbs in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) Replacing the position light bulbs in a BMW 3 Series E90 is a very simple task. As shown, the optical group is accessible from the small door located…
How to replace the position light bulbs in the BMW 3 Series?
How to replace the position light bulbs in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, you can see how to replace the position light bulbs in the BMW 3 Series, lights also known as "angel eyes". Before proceeding, ensu…
How to Replace the Headlight Bulbs on a BMW 3 Series
How to Replace the Headlight Bulbs on a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Learn how to replace the bulbs in the headlight assembly of a BMW 3 Series. Remove the cover located in the front wheel well (if necessary, remove th…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos