Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Broken or Misaligned Thermostat

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Thermostat

This video shows you how to replace the thermostat. The thermostat is an essential component for the proper functioning of the engine and its cooling system. A broken or misaligned thermostat does not open and prevents the coolant from entering the engine, causing overheating. To replace the thermostat, drain the coolant from the drain valve located on the radiator. Then, remove the bolts holding the thermostat and pull it out, cleaning any remaining material from the housing. Install the new thermostat and a new gasket, placing the thermostat with the spring side into the engine, and reassemble everything.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fixing Thermostat Housing Issues
Fixing Thermostat Housing Issues
BMW Serie 5 (1995-2003 / E39) Replacing the thermostat, a very important component in a vehicle, is usually within everyone's reach. However, sometimes issues can arise with its h…
Tips for the Thermostat in Case of Engine Overheating
Tips for the Thermostat in Case of Engine Overheating
BMW Serie 5 (1995-2003 / E39) This video provides some tips regarding the proper functionality of the thermostat in a BMW 5 Series. The thermostat is the valve that opens and clos…
Automobile Thermostat Replacement
Automobile Thermostat Replacement
BMW Serie 5 (1995-2003 / E39) The thermostat is the device that manages the temperature of your automobile. To proceed with this operation, leave the car off for a few hours to av…

Other guides you may be interested in

How to Replace the Diesel Filter on a Dacia Duster

Let's see how to replace the diesel filter on a Dacia Duster. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver (remove the circle), then reach the front headlamp located in the bumper (as shown in the video). After removing the container, take out the filter inside and fit a new one (same size). Refit the container and the plastic cover under the car's bumper with the attached clips. Test the proper functioning. Refit the front circle with the securing clips and lower the car.

Watch the video!


by ScegliAuto

More videos