Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock Cylinder on a BMW 3 Series E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Door lock

In this video, you will see the steps to remove and replace the lock cylinder on a BMW 3 Series E46 in simple and quick steps; many types of vehicles use this same system. First, open the front door of your car and remove the side rubber plug by prying it with something thin. Then, use a hex key to remove the lock cylinder from the outside, as shown in the video. At this point, disassemble the cylinder and perform the repair or directly replace it.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Lock Cylinder on a BMW 3 Series E46
How to Remove the Lock Cylinder on a BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this short and simple video, we will see the steps to remove and possibly replace the door lock on a BMW 3 Series E46. First, open the front door …
Where is the fuse box of the BMW 3 Series E46 located?
Where is the fuse box of the BMW 3 Series E46 located?
BMW Serie 3 (1998-2006 / E46) In the following guide aimed at all of you who own a BMW Series 3 e46, we will help you find in a few simple steps the box containing all the car's f…
Where to Find the Fuses in the BMW 3 Series E46
Where to Find the Fuses in the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video, see where to find the fuse box in the BMW 3 Series E46, the fourth generation of the successful model from the Bavarian manufacturer. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos