Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Sunroof on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Warning light – error code

In today's video, we will see how to unlock the sunroof on the BMW 3 Series Touring E91. Enter the vehicle and turn the key to the first position (or press the ignition button once for keyless vehicles). Now, hold down the sunroof open button for about twenty seconds. The sunroof will fully open and then close. At this point, the reset of the related control unit will be complete, and the sunroof will function correctly again. If this does not work, check the corresponding fuse or alternatively consult a workshop.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the sunroof on a BMW 3 Series, you need to remove the headliner from inside the cabin. First, disconnect the courtesy light assembly and r…
BMW Serie 3 (2005-2013 / E91, E90, E92) To remove the roof trim on the BMW 3 Series, disassemble all components inside the vehicle that prevent the headliner from being detached: these incl…
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner in a BMW 3 Series, a very simple and quick operation. First, open the trunk. Then, remove …

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2012-2019 - What does the BMW 3 Series F30 blue battery light mean? Read answer
    • Serie 3 2005-2013 - What does the check engine light mean on the BMW 3 Series E90? Read answer
    • Serie 3 1998-2006 - What does the EML light indicate in the BMW 3 Series? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos