Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil Sensor

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

This video shows you how to replace the engine oil sensor. First, remove the oil pan and clean it from any dirt residue.

Then, locate the position of the oil sensor; it is easily removable by unscrewing the 3 nuts that secure it to the pan and using a screwdriver to pry it off. Once removed, you will find a gasket or O-ring inside that should be replaced if it is excessively worn before installing the new sensor.

The oil sensor is extremely important in a car as it helps you understand when your engine oil is about to run out.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Replacing Engine Oil Level Sensor and Performing Maintenance
Replacing Engine Oil Level Sensor and Performing Maintenance
BMW Serie 3 (1998-2006 / E46) Lift the vehicle on appropriate jack stands and drain the engine oil through the oil pan drain plug. Directly in front of the drain plug, you will fi…
Replace the Timing Chain on a BMW 320 TDI
Replace the Timing Chain on a BMW 320 TDI
BMW Serie 3 (2012-2019 / F31, F30) A tutorial on how to replace the timing chain on a BMW 320 F30 is always very interesting. While changing the timing belt is a complex job, replacing…
Replacing the Key Battery on a BMW 3 Series
Replacing the Key Battery on a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Replacing the key battery on a BMW 3 Series. Let's see how to do the replacement. Take your remote and slide the button to release the metal key. Onc…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos