Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a BMW 1 Series?

Model: BMW Serie 1 F21, MK 2, F20 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

In this tutorial, you will see how to replace the battery in a BMW 1 Series F20, a very simple and quick operation. First, ensure that the key is not inserted, then open the boot and remove the floor panel of the compartment.

Next, unscrew the two fixing bolts of the bracket and disconnect both terminals, loosening the respective nuts, starting with the negative. At this point, disconnect the small ventilation tube, unscrew the 13mm bolt of the lower bracket, remove the battery, and fit the replacement by following the reverse procedure.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

BMW 1 Series Battery Replacement
BMW 1 Series Battery Replacement
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this guide, you will learn how to remove and replace the battery of a BMW 1 Series. First, note that in almost all BMWs, the battery is located at…
How to Replace the Key Battery on a BMW 1 Series
How to Replace the Key Battery on a BMW 1 Series
BMW Serie 1 (2011-2019 / F21, MK 2, F20) This brief and simple video tutorial shows all the necessary steps to replace the battery in the remote control of a second-generation BMW 1 Series, …
How to Replace the Remote Battery in a BMW 1 Series
How to Replace the Remote Battery in a BMW 1 Series
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In today's video, see how to replace the service battery in a BMW 1 Series F20, which is the second generation of the German compact. This tutorial a…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos