Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a BMW 1 Series Remote Key?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Key

To replace the battery in the BMW 1 Series remote key, lever open the groove that separates the two halves of the remote using an object like a screwdriver. This will allow you to open the device and access the internal components. The battery can then be removed from the coding chip, enabling you to insert a new replacement part. After installing the new battery, reinsert the chip back into the remote, close the two halves, and check that the device functions correctly.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Fob Battery of a BMW 1 Series
How to Change the Key Fob Battery of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) How do you change the battery in the key fob of your BMW 1 Series? Follow these detailed steps. Take your ignition remote and extract the metal key. …
How to Replace the Remote Battery on the BMW 1 Series F20
How to Replace the Remote Battery on the BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) This guide shows how to replace the battery in the remote for the BMW 1 Series F20. To replace the battery, the first step is to extract the physical…
How to Change the Battery of a BMW 1 Series Key Fob
How to Change the Battery of a BMW 1 Series Key Fob
BMW Serie 1 (2011-2019 / MK 2, F20, F21) How to change the battery of a BMW 1 Series key fob? Let's see in this detailed video how to do it. Take your key fob and slide the button to release…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos