Do it yourself
| ||||
|
BMW Serie 1 - Video tutorial
Model: BMW Serie 1
MK 2, F21, F20
- Years 2011-2019 Replacing the battery of the BMW 1 Series remote control, as we can see in this tutorial, is a very simple and economical operation. To do this, we will not need any particular tools but only a 3V CR2450 replacement battery. First of all we hold down the button on the back, then extract the metal emergency key and use it to lever on the indicated slot, thus opening the door. At this point we can remove the old battery, insert the replacement one in the right direction and reassemble everything by following the reverse procedure.
Posted on 5 October 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |