Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lower Engine Cover of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013

In this video tutorial, you will learn how to remove and replace the lower engine cover or shield of the BMW 3 Series in simple and quick steps. First, lift the vehicle with a jack and start unscrewing all the fastening screws of the splash shield; to do this, use a socket wrench, as shown in the video. At this point, clean the cover or replace it (if it is cracked); then reinstall the plastic panel, securing it properly with all its screws, applying the reverse procedure of removal!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radiator from the BMW 3 Series
How to Remove the Radiator from the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, let's go over the instructions to remove and replace the engine cooling radiator on the BMW 3 Series. First, open the hood of the vehicle and …
Replacing the Timing Chain on the BMW 3 Series
Replacing the Timing Chain on the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, discover the steps to remove and replace the timing chain on the BMW 3 Series, following the instructions below. First, open the hood of your …
Guide to Replacing the Cylinder Head Gasket on BMW 3 Series
Guide to Replacing the Cylinder Head Gasket on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide will show you the main steps to remove and replace the cylinder head gasket on BMW 3 Series models with gasoline engines. First, open the …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos